WG Calibration - CLKA2 Kits Series
Two Precision Fixed Loads Calibration support TRL and SSLT calibration method
Features
Two Precision Fixed Loads
0.75 to 110GHz
WR975 Through WR10
Fixed Load Calibration
Support TRL and SSLT Calibration Method
Keysight (Agilent), Anritsu and Rohde & Schwarz VNAs Supported
Description
The A-INFO CLKA2 Series Calibration Kits are waveguide kits designed to provide accurate TRL(Thru-Reflect-Line) calibration of VNA for measurement in rectangular waveguide from WR975 to WR10 (0.75 to 110GHz). CLKA2 Series Calibration Kits provide all the necessary components for an accurate TRL calibration. In addition to TRL calibration, CLKA2 Series can also make SSLT(Short-Short-Load-Thru) and offset load calibration. All kit components have both standard flange and precision flange(APF Series).
Components included in CLKA2 Series Waveguide Calibration Kits
|
QTY |
Description |
Notes |
|
2 |
WG to Coaxial Adapter |
Refer below table for each WG band. |
|
2 |
Precision fixed termination |
Two terminations for CLKA2 series. |
|
1 |
1/4-λ Spacer (shim) |
- |
|
1 |
Fixed (reference plane) Short |
- |
|
1 |
Verification Standard*** |
Optional, not included in standard Model. |
|
1~3 |
Screw Pack |
Qty is depending on WG band. |
|
1 |
Dowel Pack* |
For APF flange only. |
|
1 |
Hex Ball Driver |
- |
|
1 |
Calibration Software** |
- |
|
1 |
Carrying Case |
- |
Notes:
*Indexing refer Precision Flange (APF)
**Calibration Software currently supports Keysight 872x Series, PNA Series, Anritsu and Rohde&Schwarz ZVx Series . Please ask A-INFO for more information when place order.
***Verification Standard is suggested used for WR28,WR22,WR19,WR15,WR12,WR10 Calibration Kit.
|
||||||||||||||||||||||||||||||
